viernes, 17 de julio de 2015

Rapid Spanning tree en ComWare 5

Como habrán notado en ComWare 5 STP no viene activo por default, así que acá va como hacerlo rápidamente
[HP Switch] stp enable
[HP Switch] stp mode rstp
[HP Switch] stp priority 0

[HP Switch-GigabitEthernet1/0/10] stp edged-port enable
[HP Switch-GigabitEthernet1/0/10] stp cost 10000
[HP Switch-GigabitEthernet1/0/10] stp port priority 96

[HP Switch] display stp
——-[CIST Global Info][Mode RSTP]——-
CIST Bridge :0.0022-57bc-d900
Bridge Times :Hello 2s MaxAge 20s FwDly 15s MaxHop 20
CIST Root/ERPC :0.0022-57bc-d900 / 0
CIST RegRoot/IRPC :0.0022-57bc-d900 / 0
CIST RootPortId :0.0
BPDU-Protection :disabled
Bridge Config-
Digest-Snooping :disabled
TC or TCN received :148
Time since last TC :0 days 0h:4m:35s
—-[Port505(Bridge-Aggregation1)][FORWARDING]—-
Port Protocol :enabled
Port Role :CIST Designated Port
Port Priority :128
Port Cost(Dot1T) :Config=auto / Active=10000
Desg. Bridge/Port :0.0022-57bc-d900 / 128.505
Port Edged :Config=disabled / Active=disabled
Point-to-point :Config=auto / Active=true
Transmit Limit :10 packets/hello-time
Protection Type :None
MST BPDU Format :Config=auto / Active=802.1s
Port Config-
Digest-Snooping :disabled
Rapid transition :true
Num of Vlans Mapped :3
PortTimes :Hello 2s MaxAge 20s FwDly 15s MsgAge 0s RemHop 20
BPDU Sent :146
TCN: 0, Config: 0, RST: 141, MST: 5
BPDU Received :181
TCN: 0, Config: 0, RST: 181, MST: 0